|
| |
TM 5-4210-233-14&P-1
5-22.
BLOWER REPAIR - Continued
5-142
(63)
Remove four screws each (27) and washers (28) from
front end plate (6) and rear end plate (10).
(64)
Install oil slinger (31) on rotor shaft (4) at front end
plate (6).
(65)
Install fuel pump disk (32), lockwasher (33), and screw
(34).
(66)
Tighten screw (34) to 65 lb-ft (88 Nm).
(67)
Bend two lockwasher tangs around head of screw (34).
(68)
Install front end plate cover (35), new gasket(36) with
nine bolts (37)
|
