|
| |
TM 5-4210-233-14&P-1
5-22. BLOWER REPAIR - Continued
(12)
Bend tangs of lockwasher (22) flat.
(13)
Remove screw (23), lockwasher (22), fuel pump
disk (24), and oil slinger (25) from front end plate
(26).
NOTE
Remove shop cloth.
(14)
Remove six screws (27) and two flanged bearing
retainers (28) from front end plate (26).
(15)
Loosen two screws (29) three turns.
(16)
Remove six screws (30) and two flat bearing
retainers (31) from rear end plate (32).
(17)
Remove two screws (33) from rear end plate (32).
NOTE
Six puller screws must be 1/4 in.-20 x 1-1/4 in.
(32 mm) or longer.
5-126
|
