|
| |
TM 5-4210-233-14&P-1
5-22.
BLOWER REPAIR - Continued
NOTE
Six puller screws must be 1/4 in.-20 x 1 -1/4 in. (32
mm) or longer.
(18)
Install three screws and align two puller tools
to rear end plate (32).
(19)
Turn both puller screws (15) evenly and
remove rear end plate (32).
(20)
Remove puller tool from rear end plate (32).
(21)
Remove two screws (29) from front end
plate (26).
(22)
Tag front end plate (26) and indicate top.
(23)
Tag front end of blower housing (34) and
indicate top.
(24)
Remove front end plate (26) by tapping with
mallet.
CAUTION
Handle rotors with care to avoid scratching surfaces.
NOTE
Tag rotors before removal.
(25)
Remove right rotor (35) and left rotor (36).
5-127
|
