|
| |
TM 5-4210-233-14&P-1
Table 2-1. Operator PMCS Procedures -Continued
Item
Interval
Equipment Is Not
No.
A
D
W
ITEM TO BE INSPECTED/Procedures
Ready/Available If:
6
CAB ASSEMBLY, LIGHTS AND CONTROLS -
Contlnued
Air Horns
•
Check operation of air horns. Be sure pressure in air
reservoir is sufficient for proper operation.
Cab Exterior Trim and Scuff Plates
•
Check missing or damaged trim and scuff plates. Be
sure attaching hardware is in place.
Cab Instrument Panel Gauges, Swltches, Indlcator
Lights
•
•
Check gauges operate. Check for visible damage to
- Any gauges, switches or
gauges, switches, or indicator lights. Check switches
indicator lights are
for proper operation. Be sure indicator lamps
inoperable.
illuminate.
Dashboard Compartment Doors
•
Be sure compartment door latches work properly.
Clean glove compartment. Check for loose or missing
attaching hardware.
Transmlssion Shift Control
•
•
Check operation of shift unit with main engine
- Any range is not
running. All gear ranges should be selectable and
operable.
movement of handle should be free and smooth. Be
sure truck will not start unless seiected to Neutral.
Heater/Defroster
•
With main engine running, set HI/LO/OFF switch to
HI. Set HEATER and DEFROST levers to MAX.
Check for adequate hot air tlow.
2-36
|
