|
| |
TM 5-4210-233-14&P-1
Table 2-1. Operator PMCS Procedures -Continued
Item
Interval
Equipment Is Not
No.
A
D
W
ITEM TO BE INSPECTED/Procedures
Ready/Available If:
6
CAB ASSEMBLY, LIGHTS AND CONTROLS -
Contlnued
Seats and Seat Belts
•
Check operation of all seat position levers to ensure
- Seats loose, or any seat
each seat is fully adjustable.
adjuster fails to lock.
•
Check operation of seat belts and check fabric is not
- Seat belts missing or
worn or torn.
severely damaged.
•
Check ail seat and belt fasteners are tight.
•
Check operation of driver's seat adjustment levers
- Seats loose, or any seat
and valve to ensure seat is fully adjustable.
controls fail to operate
properly.
•
Check operation of seat belts and check fabric is not
- Seat belts missing or
worn or torn.
severely damaged.
•
Check ail seat and belt fasteners are tight.
Windshleld Washer/Wlper
•
•
Check fluid level in wash bottle is up to the fuII mark.
Replenish as required.
•
•
Check wiper and washer controls. Wiper speed
should be fully adjustable between slow and fast
speed. Washer nozzles should spray fluid into path of
wipers. Clean nozzles as required.
2-37
|
