|
| |
TM 5-4210-233-14&P-1
Table 2-1. Operator PMCS Procedures -Continued
Item
Interval
Equipment Is Not
No.
A
D
W
ITEM TO BE INSPECTED/Procedures
Ready/Available If:
5
HOSE BODY ASSEMBLY - Contlnued
Rear Roll-Up Door
•
Check that rear roll-up door operates smoothly,
without binding.
•
Check compartment to see that equipment is stowed
- Equipment stowing
correctly and fixtures are in place.
fixtures missing or
loose.
•
Inspect ladder keeper door for missing attaching
- Ladder keeper door
hardware or looseness. Report loose keeper door or
missing or will not latch
missing attaching hardware to Unit Maintenance.
securely.
Air Bottle Rack and Slide Tray
•
Check that locking pin and locking pin retainer chain
are in place.
•
Check that slide tray works smoothly, and slide locks
function properly.
•
Inspect air bottle rack for visible damage.
Report any deficiencies to Unit Maintenance.
6
CAB ASSEMBLY, LIGHTS AND CONTROLS
Cab Roof Panel
•
•
Check that attaching hardware is in place, panel is
- Attaching hardware
not severely bent, scratched, or damaged. Check
totally missing.
inside of cab for signs of water leakage.
Cab Doors
•
•
Ensure both cab doors latch. Check inner and outer
- Cab door will not latch.
handles operate.
Be sure door seals are in place.
2-34
|
