|
| |
TM 5-4210-233-14&P-1
Table 2-1. Operator PMCS Procedures -Continued
Item
Interval
Equipment Is Not
No.
A
D
W
ITEM TO BE INSPECTED/Procedures
Ready/Available If:
5
HOSE BODY ASSEMBLY - Contlnued
Llghts - Contlnued
•
Report any failed lamps to Unit Maintenance.
Handralls
•
Inspect for missing attaching hardware or iooseness.
Report any loose handrail or missing attaching
hardware to Unit Maintenance.
Rear Step Platforms and Tread Plates
•
Inspect for visible damage or missing attaching
- Attaching hardware
hardware.
totally missing from step
plafform or tread plate.
Report visible damage or missing attaching hardware
to Unit Maintenance.
Upper and Lower Compartment Doors
•
•
Check each compartment for the following:
a.
Hatch holder holds door in open position.
b.
Lamp illuminates when switch is depressed.
c.
Door latches easily and does not open when
- Door will not latch
tugged.
securely.
d.
Door seal is intact and securely in place.
e.
Equipment is stowed correctly and fixtures are in
- Heavy equipment
place.
stowing fixtures missing or
loose.
Report any deficiencies to Unit Maintenance.
2-33
|
