Installation -706880357

TM 5-4210-233-14&P-1

4-43. #1 CROSSLAY VALVE -Continued

NOTE

Perform step (11) only if handle assembly was disassembled.

(11) install stop brackets (27) onto handle (13) with socket head screws (26).

(12) Install handle assembly, actuator clip (12), handle disc (11), handle washer (10) and socket head

screw (9).

e. Installation.

(1) Apply a thin coat of silicone grease (Item 11, Appendix E) to two new O-rings(8). Install new

O-rings (8) in grooves on valve body.

(2) Install valve (6) between flanges (7).

(3) Install eight bolts (5).

(4) Position control rod (3) and nylon washer (4) on valve handle.

(5) Install retaining pin (2) and new cotter pin (1).

f. Follow-on Maintenance.

(1) Install curbside operator's panel (see para 4-26).

(2) Connect batteries (see para 4-114).

4-228