Table 2-1. Operator PMCS Procedures-continued -706880072

TM 5-4210-233-14&P-1

Table 2-1. Operator PMCS Procedures - Continued

Item

Interval

Equipment Is Not

No. A D W

ITEM TO BE INSPECTED/Procedures

Ready/Available If:

AERIAL LADDER AND WATER TOWER

ASSEMBLY - Continued

Aerlal Ladder Intercom

Operate aerial ladder intercom. Ensure proper

- Intercom does not work.

operation. Check toggle switch boot is in place and

free of cracks. Check attaching hardware is in place.

Report any deficiencies to Unit Maintenance.

Monitor and Nozzle, Controls

Operate monitor and nozzle functions. Check for

- Monitor and nozzle does

smooth operation through full range of motion.

not work.

Ensure nozzle end rotates smoothly.

Front and Rear Extension Cylinders, Hoses, Tubes

and Fittings

Visually inspect for leaks.

- Major hydraulic oil

leaks.

Check hoses for signs of abrasion, kinks, pinching.

Report any deficiencies to Unit Maintenance.

Aerial Ladder Tension Cables

Inspect for fraying, tightness. Check cables are

- Cables are sagging or

tracking properly in sheaves. Report any deficiencies

frayed.

to Unit Maintenance.

Aerial Ladder Electrical Cables

Inspect for broken insulation, proper tension. Check

- Cable or insulation

cables do not sag, track properly in sheaves. Report

broken, major sagging.

any deficiencies to Unit Maintenance.

AUXILIARY POWER UNIT (APU)

APU Inspect

Check for oil/fuel leaks, blocked or clogged cooling air

inlet. Clean as required.

2-44