|
| |
TM 5-4210-230-14&P-1
TRUCK SERVICE MANUAL
Fig. 14 Removing Trunnion Bearings Cup
Fig. 15 Spindle Bushing
Axle Shaft and Universal Joint Assembly
1.
Assemble inner race and cage by indexing notched
tooth of inner race with elongated opening in cage and
rolling inner race into cage. See Fig. 16. MT-17792
Fig. 16 Assembling Inner Race and Cage
2.
Align elongated openings of cage with opposite teeth of
outer race bell and lower inner race and cage assembly
into outer race bell (Fig. 17).
Fig. 17 Assembling Inner Race, Cage and Outer Race
Bell
3.
Tilt inner race in outer race until one ball can be
inserted, continue this procedure until all balls are
inserted. Prelubrication of components and a soft
faced hammer may be used to aid inner race
movement.
4.
Install new lock ring on axle shaft end and place axle
shaft in a vise equipped with soft jaws. See Fig. 18.
CTS-2658S Page 17
PRINTED IN UNITED STATES OF AMERICA
|
