INSTALLATION - TM-5-4210-224-14-P0353

TM 5-4210-224-14&P

4-188. FRONT DRIVE PROPELLOR SHAFT REPLACEMENT. (Continued)

INSTALLATION

WARNING

Cleaning solvent (Appendix D, Item 44) is

both toxic and flammable. Keep off skin.

Use only in a well-ventilated air and avoid

prolonged breathing of vapors. Keep away

from open flame.

NOTE

Clean all parts in solvent and dry with

compressed air before installing.

a. Install the boot (11) with the clamps (12) using

the Keystone Clamp Pliers.

b. Lubricate (Appendix D, Item 22) the slip yoke (3)

and install it to the axle yoke (4).

f. Install the bolts (10) to the flange (2) by mating

c. Adjust the propellor shaft (1) length and install

the joint, using the reference marks.

by mating the joint using the reference marks.

g. Torque the bolts (10) to 74 ft-lbs (100 N-m).

NOTE

d. Install the U-bolts (7), washers (6), nuts (5), the

Lubricate the constant velocity joint (13)

retainers (9), and bolts (8).

with lubricant (Appendix D, Item 22).

e. Torque the bolts and nuts to 15 ft-lbs (20 N-m).

h. Install universal joints (paragraph 4-185).

4-189. CENTER SUPPORT BEARING REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Equipment Condition

General Mechanics Tool Kit

Para.

Condition Description

Hoist

4-185

Universal Joints Removed

4-186

Rear Propellor Shaft Removed

Materials/Parts

4-187

Rear Slip Yoke Removed

Lubricant

General Safety Instructions

(Appendix D, Item 22)

Engine OFF

Solvent

Transmission in (N) neutral.

(Appendix D, Item 44)

Parking brake and micro-brakelock set.

Support Bearing

(5598)

4-258