REAR SLIP YOKE REPLACEMENT.

TM 5-4210-224-14&P

4-186. REAR PROPELLOR SHAFT REPLACEMENT. (Continued)

c. Torque the bolts (3) to 24 ft-lbs (33 N.m).

d. Install universal joints (paragraph 4-185).

4-187. REAR SLIP YOKE REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Equipment Condition

Driveshaft Wrench

Para.

Condition Description

(J-33051)

Universal Joint Removed

General Mechanics Tool Kit

Rear Propellor Shaft Removed

Hoist

General Safety Instructions

Engine OFF

Materials/Parts

Transmission in (N) neutral.

Slip Yoke (7815849)

Parking brake and micro-brakelock set.

Batteries disconnected.

REMOVAL

INSTALLATION

CAUTION

a. Lubricate the slop yoke and install slip yoke to

universal joint.

Do not pound on the propellor shaft yoke

ears or the injection joints may fracture.

b. Install the yoke and cross assembly (1).

Never pry or place any tool between a yoke

and a universal joint.

Remove the yoke and cross assembly (1).

NOTE

Tape the bearing cups to prevent the loss

of bearing rollers.

4-256