FRONT DRIVE PROPELLOR SHAFT REPLACEMENT.

TM 5-4210-224-14&P

4-187. REAR SLIP YOKE REPLACEMENT. (Continued)

c. Install rear propellor shaft

d. Install universal joints (para-

(paragraph 4-186).

graph 4-185).

4-188. FRONT DRIVE PROPELLOR SHAFT REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Keystone Clamp Pliers

Equipment Condition

(J-22610)

Para.

Condition Description

General Mechanics Tool Kit

4-185

Universal Joint Removed

Hoist

Materials/Parts

Lubricant

(Appendix D, Item 22)

General Safety Instructions

Solvent

Engine OFF

(Appendix D, Item 44)

Transmission in (N) neutral.

Propellor Shaft

Parking brake and micro-brakelock set.

(7845045)

REMOVAL

a. Reference mark the relationship of the propellor

shaft (1) to the front axle and the transfer case

flange (2).

b. Disconnect the slip yoke (3) from the front axle

yoke (4) by removing the nuts (5), washers (6),

U-bolts (7), bolts (8), and retainers (9).

NOTE

Do not pound on the joint to disconnect.

c. Remove the bolts (10) at the flange (2).

d. Remove the boot (11) by releasing the boot

clamps (12) using the Keystone Clamp Pliers.

e. Slide the propellor shaft (1) forward enough to

disengage, then withdraw the propellor shaft (1)

rearward, taking care to avoid dropping cap

assemblies from the yoke ends.

4-257