 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-224-14&P
4-146. LOCK CYLINDER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General Mechanics Tool Kit
Para. Condition Description
Materials/Parts
Cylinder (7830380)
General Safety Instructions
Engine OFF.
Transmission in (N) neutral.
Parking brake and micro-brakelock set.
Batteries disconnected.
REMOVAL
a.
Place the lock cylinder in the "run" position.
NOTE
It is not necessary to completely
remove the turn signal switch from
the column.
Pull the switch
rearward far enough to slip it out.
Do not pull the harness out of the
column.
CAUTION
If the retaining screw is dropped
when removing, it could fall into
b.
Align the cylinder key (3) with the keyway in
the column requiring a complete
the housing and rotate the knob clockwise
disassembly to retrieve the screw.
against the stop.
b.
Remove the retaining screw (1) and the lock
c.
Push the lock all the way in.
cylinder set (2).
d.
Install the retaining screw (1) and torque to
INSTALLATION
40 in-lbs (4.5 N.m).
a.
Install the lock cylinder set (2).
e.
Install the turn signal switch (paragraph 4-
145).
f.
Install the steering wheel (paragraph 4-142).
g.
Reconnect battery cables.
4-200
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals