INSTALLATION - TM-5-4210-224-14-P0220

TM 5-4210-224-14&P

4-84. FUEL FILTER REPLACEMENT. (Continued)

INSTALLATION

a. Install a new filter element.

f. Crank the engine for 10 to 15 seconds and then

b. Connect the bail wires (3).

wait one minute for the starter motor to cool.

c. Close the drain valve (2).

g. Repeat until clear fuel is observed coming from

the air bleed.

d. Install a 1/8 inch (3 mm) inside diameter hose to

the air bleed port (6) placing the other end of the

h. Close the air bleed (1). Disconnect the hose

hose into a suitable container.

and remove the container.

e. Disconnect the fuel injection pump shut-off

i. Connect the fuel injection pump solenoid wire.

solenoid wire.

j. Install the fuel filler cap.

CAUTION

If the engine is to be cranked or started with

k. Start the engine and let it idle for five minutes.

the air cleaner removed, take care not to let

objects fall in to the engine. If the engine is

l. Check

the

fuel

filter

for

leaks.

running, suction can pull loose objects into

the engine. Objects pulled or dropped into

the engine can cause costly engine damage.

4-85. FUEL PUMP REPLACEMENT.

This task covers:

Removal

Installation

INITIAL SET-UP

Equipment Condition

Para. Condition Description

Tools

4-88

Fuel System Drained

General Mechanics Tool Kit

General Safety Instructions

Materials/Parts

Engine OFF.

Fuel Pump (23500251)

Transmission in (N) neutral.

Gasket

(14022651)

Parking brake and micro-brakelock set.

4-125