REMOVAL - TM-5-4210-224-14-P0223

TM 5-4210-224-14&P

4-87. FUEL LINE REPLACEMENT. (Continued)

INSTALLATION

REMOVAL

a. Position replacement fuel line(s) to vehicle.

a. Disconnect fuel line(s) at fitting(s).

b. Using proper hose fitting(s) connect fuel line at

proper junction.

b. Remove fuel line.

c. Tighten all fitting connections.

NOTE

Follow the same routing as the original pipe

d. Start the vehicle and check for leaks.

when re-installing.

Never replace fuel pipe (welded steel

tubing) with copper or aluminum tubing.

Check and replace any damaged "O" Rings

or washers if used.

Pipes must be secured to the frame with a

minimum 1/4 inch (6 mm) clearance to

prevent contact and chafing.

4-88. FUEL TANK REPLACEMENT.

This task covers:

a. Removal

Installation

INITIAL SET-UP

General Safety Instructions

Tools

General Mechanics Tool Kit

Disconnect the negative battery cable from the battery.

Place "NO SMOKING signs near work areas.

Have a C02 fire extinguisher nearby.

Wear safety glasses.

Materials/Parts

Fuel Tank (14071994)

Siphon or pump fuel into an explosion proof container.

4-128