Table 4-4. Organizational Troubleshooting Chart - continued

TM5-4210-224-14&P

Table 4-4. Organizational Troubleshooting Chart.(Continued)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

46. CLUTCH SLIPS.

Check clutch linkage for proper adjustment.

Adjust clutch linkage.

47. CLUTCH GRABS.

Inspect engine mounts for loose or damaged hardware.

Refer to next higher level of maintenance for replacement.

48. PEDAL STAYS ON THE FLOOR WHEN DISENGAGED.

Inspect linkage and release bearing for binding.

Free, replace, or lubricate linkage or bearing.

TRANSFER CASE ASSEMBLY

49. EXCESSIVE NOISE.

Step 1. Check lubricant level.

Fill as required (paragraph 4-9).

Step 2. Inspect yoke bolts for looseness.

Tighten yoke bolts.

Step 3. Inspect adapter bolts for looseness.

Tighten adapter bolts.

50. SHIFT LEVER DIFFICULT TO MOVE.

Perform operational check on shift lever.

Refer to next higher level of maintenance.

51. LUBRICANT LEAKING.

Step 1. Inspect for excessive lubricant in case.

Drain to proper level.

Step 2. Inspect for loose or missing hardware.

Tighten or replace.

WHEEL ASSEMBLY

52. EXCESSIVE TIRE WEAR.

Step 1. Check tires for proper inflation.

Inflate to recommended pressure.

Step 2. Inspect shock absorbers for damage.

Replace shock absorbers (paragraph 4-231).

4-39