|
|
52. Relief Valve and Adapters, Removal and
55. Pump Head and Body, Removal and
Disassembly
Disassembly
the relief valve and adapters.
53. Relief. Valve and Adapters, Cleaning,
Inspection, and Repair
a. Cleaning.
Clean all parts in an approved
the pump head and body.
cleaning solvent and dry thoroughly.
56. Pump Head and Body, Cleaning, Inspection,
b. Inspection. Inspect all parts for wear, defects,
and Repair
and damage.
a. Cleaning.
Clean all parts in an approved
c. Repair. Replace or repair worn, defective, or
cleaning solvent and dry thoroughly.
damaged parts as necessary.
b. Inspection. Inspect all parts for wear, defects,
54. Relief Valve and Adapters, Reassembly and
and damage.
Installation
c. Repair. Replace or repair worn, defective, or
damaged parts as necessary.
the relief valve and adapter in the reverse order.
57. Pump Head and Body, Reassembly and
b. Test valve for movement as follows:
Installation
(1) Remove bonnet (13) and move valve (17)
in and out.
the pump head and body in the reverse order.
(2) If packing (16) sticks in cylinder, remove
cover (11) and lightly grease the cylinder
wall in path of packing.
(3) Install bonnet (13) and cover (11).
INDEX TO FIGURE 13
1 Nut, 7/16-20 (4 rqr)
8 Elbow
15 Piston
2 Discharge adapter
9 Elbow
16 Packing
3 Gasket
10 Screw, cap, 7/16-20 x 1 2/4 in. (4 rqr)
17 Valve
4 Body
11 Cover
18 Screw, cap, 7/16-20 x 14 in. (4 rqr)
5 Gasket
12 Screw, cap, 7/16X-20 x 1 in. (4 rqr)
19 Discharge adapter
6 Gasket
13 Bonnet
20 Gasket
7 Screen and elbow
14 Spring
TAGO 5947-A
24
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |