Section III. REMOVAL AND INSTALLATION OF MAJOR COMPONENTS OR AUXILIARIES

Section III. REMOVAL AND INSTALLATION OF MAJOR COMPONENTS OR AUXILIARIES

14. General

(7) Remove the foam tank and disconnect

the tank fill and tank suction lines (TM 5-

4210-205-12).

This section provides the information necessary

(8) Refer to figure 1 and remove the water

to direct support, general support, and depot

pump from the firetruck.

maintenance personnel for removal of the water pump

from the firetruck.

b. Installation.

15. Water Pump

(1) Refer to figure 1 and install the water

a. Removal.

pump on the firetruck.

(2) Install the foam tank and connect the tank

(1) Remove the pump gage panel (TM

fill and tank suction lines (TMI 5-4210205-

54210-205-12).

12).

(2) Disconnect hose reel piping and wiring

(3) Install the primer pump and primer pump

(TM 5-4210-205-12).

motor (TM 5-4210-205-12).

(3) Remove the drain line valve and lines

(4) Install the pump drive universal joint (TM

(TM 5-4210-205-12).

5-4210-205-12).

(4) Remove the pump suction heads (TM

(5) Install the pump suction heads (T,4210-

54210-205-12).

205-12).

(5) Remove the pump drive universal joint

(6) Install the drain line valve and lines

(TM 5-4210-205-12).

(TA\par5-4210-205-12).

(6) Remove the primer pump and primer

(7) Connect hose reel piping and wiring (T.[

pump motor (TM 5-4210-205-12).

5-4210-205-12).

(8) Install the pump gage panel (T[ 5;-

4210205-12).

TAGO 5947-A