|
|
Section XIV. LUBRICATION SYSTEM
134. General
(1)
Clean all parts with a clean cloth
dampened in an approved cleaning solvent, and dry
The lubrication system consists of an oil tank and
thoroughly.
lines that supply lubrication to the vacuum priming
pump.
(2)
Inspect all parts for damaged or
defective condition.
135. Oil Tank and Lines
(3)
Replace or
repair
damaged
or
a.
Removal.
defective parts as necessary.
(1)
Disconnect the oil line at the priming
c.
Installation.
pump (para. 122).
(1)
Refer to figure 70, and install the oil
(2)
Refer to figure 70, and remove the oil
tank and lines on the cab and printing pump.
tank and lines from the cab and p)riming pulp).
(2)
Connect the oil line at the priming
b.
Cleaning, Inspection, and Repair.
pump (para. 122).
Figure 70. Oil tank and lines, removal and installation.
TAGO 6839A
96
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |