|
|
E-Vent line removal
F-Tank removal
Figure 65-Continued.
(1)
Clean all parts with a clean cloth
c.
Installation.
dampened in an approved cleaning solvent, and dry
(1)
Refer to figure 65, and install the
thoroughly.
water tank and lines on the special purpose body.
(2)
Inspect all parts for damaged or
(2)
Install the ladder support assemblies
defective condition.
(3)
Replace
or
repair
damaged
or
(3)
Install the foam tank (para. 127).
defective parts.
(4)
Fill the water tank (para. 18).
d.
Reassembly.
Refer to figure 66, and
129. Pump Drive Universal Joint
reassemble the pump drive universal joint in the reverse
order.
a.
Removal. Refer to figure 59, and remove
the pump drive universal joint from the pump and
e.
Installation. Refer to figure 59, and install
transfer case.
the pump drive universal joint on the pump and transfer
case.
b.
Disassembly.
Refer to figure 66, and
disassemble the pump drive universal joint.
130. Drain Valve and Tubing
c.
Cleaning, Inspection, and Repair.
a.
Removal
(1)
Drain the lines (para. 20)..
TAGO 6839A
91
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |