|
|
(2)
Inspect all parts for damaged or defective
125. Suction and Discharge Heads and Screens
condition.
a. Removal.
(3) Replace or repair damaged or defective
(1) Remove the instrument panels (paras. 113
parts as necessary.
c.
Installation.
(2) Refer to figure 61, and remove the suction
(1) Refer to figure 59, and install the primer
heads and screens from the suction and
pump on the water pump manifold.
discharge lines.
(2) Install the primer pump motor and solenoid
b. Cleaning, Inspection, and Repair.
relay (para. 105).
(1) Clean all parts with an approved cleaning
solvent, and dry thoroughly.
123. Hose Reel
(2) Inspect all parts for damaged or defective
a. Removal.
condition.
(3) Replace or repair damaged or defective
(1) Remove the hose reel motor solenoid (para.
parts as necessary.
c. Installation.
(2) Remove the hose reel motor (para. 104).
(3) Refer to figure 60, and remove the hose reel
(1) Refer to figure 61, and install the suction and
from the hose reel and pump compartment.
discharge heads and screens on the suction
b. Cleaning, Inspection, and Repair.
and discharge lines.
(2) Install the instrument panels (paras. 113 and
(1) Clean all parts with a clean cloth dampened
in an approved cleaning solvent, and dry
thoroughly.
(2) Inspect all parts for damaged or defective
126. Pump Clutch Linkage
condition.
a. Removal.
(3) Replace or repair damaged or defective
(1) Remove the tool box (TM 9-2320-235-20).
parts as necessary.
(2) Refer to figure 62, and remove the pump
c. Installation.
clutch linkage from the clutch and transfer
(1) Refer to figure 60, and install the hose reel
case.
on the hose reel and pump compartment.
b. Disassembly.
Refer to figure 63, and
(2) Install the hose reel motor (para. 104).
disassemble the pump clutch linkage.
(3) Install the hose reel motor solenoid (para.
c. Cleaning, Inspection, and Repair.
(1) Clean all parts with a clean cloth dampened
in an approved cleaning solvent, and dry
124. Drive Chain
thoroughly.
(2) Inspect all parts for damaged or defective
drive chain from the hose reel and motor.
condition.
b. Cleaning, Inspection, and Repair.
(3) Replace or repair damaged or defective
parts.
(1) Clean all parts with a clean cloth dampened
in an approved cleaning solvent, and dry
thoroughly.
the pump clutch linkage in the reverse order.
(2) Inspect all parts for damaged or defective
condition.
pump clutch linkage on the clutch and transfer case.
(3) Replace or repair damaged or defective
parts as necessary.
drive chain on the hose reel and motor.
TAGO 6839A
86
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |