|
| |
TM 5-4210-233-14&P-1
5-23. TURBOCHARGER-Continued
d.
Assembly.
CAUTION
Lubricate all rotating bearing surfaces
with oil (Item 10, Appendix E).
(1) Using retaining ring pliers, install a
new retaining ring (1).
(2) Install new bearing (2), new wear washer (3), and new
retaining ring (4) in turbine side of center housing (5).
(3) Install a new retaining ring (6), new wear washer (7), and
new bearing (8) in compressor side of center housing (5).
(4) Install thrust washer (10) and attach with three thrust
bearing screws (10A).
(5) Install thrust collar (12) and new seal ring (13).
5-154
|
