|
| |
TM 9-254
6-13.
Tagging - Continued
(3)
Remove the next wire (3) from its terminated location on the terminal board and mark it with an
identification tag (4).
(4)
After removal and tagging of necessary wires or parts, repair, or replace faulty items as required.
c.
Installing Tagged Items (fig. 6-25). Prepare to replace all wires or parts that have been removed by
positioning these items as near to their original location as possible.
(1)
Check tag (4 and 2) to make sure that correct wires are positioned in their proper locations.
(2)
Replace one wire at a time to eliminate confusion. Remove tag (4) before attaching wire (3) to the
terminal board.
(3)
Secure wire (3) to terminal board E-5 at the appropriate terminal lug.
(4)
Remove tag (2) before attaching wire (1) to the terminal board.
(5)
Secure wire (1) to terminal board E-5 at the appropriate terminal lug.
6-22
|
