 |
|||
|
|
|||
|
Page Title:
Setting Up and Adjusting Optical Equipment Test Fixture |
|
||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0082 00
5.
Install mechanical adapter (6) on cross-leveling shaft end (7). Ensure that adapter keys (8) are parallel
with top of block (3), within 0.1 mil.
6.
Tighten setscrew (9) lightly.
9
10
2
8
1 fc 5 3 8
7.
Place plate-mounted level (2) on adapter keys (8).
8.
Check that bubble (10) in plate-mounted level (2) is centered.
9.
Tighten setscrew (9); recheck cross level and adapter keys.
10.
Rotate plate-mounted level (2) 180 degrees from original position, and check again that bubble (10) is
centered.
Visual Inspection
3
1
2
1 fc 5 3 9
1.
Check that all screws (1) and lockwashers (2) are present and tight.
2.
Ensure that all lock wires (3) are present and secure.
0082 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals