 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-1240-375-34&P
0057 00
TEST AND INSPECTION - Continued
Torque Inspection
1
2
3
1 fc 2 6 3
1.
Place torque wrench adapter (1) (item 14, WP 0149 00) over correction knob (2).
2.
Place torque wrench (3) on torque wrench adapter (1).
3.
Measure torque.
NOTE
Torque required for continuous turning should be between 1 in.-lb (0.11 N-m) and 4
in.-lb (0.45 N-m).
4.
If torque cannot be met, remove correction knob (2) (WP 0049 00) and check for possible bent shaft.
1
4
3
1 fc 2 6 4
5.
Place torque wrench adapter (1) (item 15, WP 0149 00) and torque wrench (3) over elevation knob (4).
6.
Measure torque.
NOTE
Torque required for continuous turning should be between 3 in.-lb (0.34 N-m) and 10
in.-lb (1.13 N-m).
7.
If torque cannot be met, remove and reinstall spring plug retainer (WP 0049 00).
0057 00-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals