ALARM BELL, MAIN DECK EXTERIOR, REPLACEMENT

TM 55-1925-292-14&P

0032 00

INSTALLATION

1. Install the mounting plate (figure 3, item 3) to the junction box (figure 3, item 6) with the two screws (figure 3,

item 5).

2. Connect the wiring to the terminal board (figure 3, item 4) using the labels from step 3 of Removal as a guide.

Remove the labels.

3. Position the horn/strobe (figure 3, item 2) on the mounting plate (figure 3, item 3) and secure it with the two

screws (figure 3, item 1).

4. Perform the Follow-On Service procedure at the end of this work package.

ALARM BELL, MAIN DECK EXTERIOR, REPLACEMENT

REMOVAL

1. Remove the bolt (figure 4, item 1) and washer (figure 4, item 2) that secure the gong (figure 4, item 3).

2. Remove the gong (figure 4, item 3) from the bell actuator assembly cover (figure 4, item 4).

3. Remove the six screws (figure 4, item 5) that secure the bell actuator assembly cover (figure 4, item 4).

Figure 4. Engine Room Alarm Bell

0032 00-6