DRAFT
TM 5-4210-249-13&P-3
0558
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01922
25. Attach two eye bolts (56) and nuts (57) on rear attachment points (58).
CAUTION
When attaching suitable lifting device, chain tension on front and rear of
transmission must be equal. Failure to apply proper tension during transmission
removal may cause transmission to shift during removal and may cause damage to
pre-connect "B" valve, pre-connect "A" flow sensor, or transmission itself.
Transmission is removed at an angle with front of transmission higher than back.
Note angle of transmission prior to removal to ensure proper installation. Failure to
comply may cause damage to equipment.
26. Attach suitable lifting device on two rear eye bolts (56) and around transmission mounting brackets (59).
27. Remove three locknuts (60), washers (61), screws (62), washers (63), plate (64), and three mounting
biscuits (65) from each of two transmission mounting brackets (59). Discard locknuts.
NOTE
Lift transmission slightly with suitable lifting device.
28. Remove three mounting biscuits (66) from each of two transmission mounting supports (67).
29. With the aid of an assistant and a suitable lifting device, lift and guide transmission (25) away from vehicle.
0558-7
