DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
EQUIPMENT (LADDER) RACK REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Materials/Parts (continued)
Tool Kit, General Mechanic's: Automotive
Lockwasher (2)
(WP 0622, Item 27)
Lockwasher (1)
Materials/Parts
Personnel Required
Adhesive, Sealant, Silicone,
MOS 63B Wheeled vehicle mechanic (2)
RTV (WP 0625, Item 5)
References
Cleaning Compound, Solvent (WP 0625, Item 12)
TM 9-2320-325-14&P
Tags, Identification (WP 0625, Item 51)
WP 0615, Fig. 133
Lockwasher (4)
Lockwasher (4)
Equipment Conditions
Lockwasher (4)
Equipment (ladder) rack unstowed (WP 0011)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01338A
NOTE
Front and rear equipment (ladder) racks are removed the same way except where noted.
Rear equipment (ladder) rack shown.
1.
Put MASTER SWITCH (1) in ON position.
CAUTION
Equipment (ladder) rack must be raised approximately 3/4 of the way up to allow
compartment door to be opened. Failure to comply may result in damage to
equipment.
2.
Push LIFT SWITCH (2) up to raise equipment (ladder) rack (3).
3.
Put MASTER SWITCH (1) in OFF position.
0519-1
