DRAFT
TM 5-4210-249-13&P-3
0468
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02056
NOTE
Remove cable ties as required.
19. Remove fuel line (30) from pump house (31).
20. Remove clamp (32) and fuel line (30) from hose (33).
21. Remove clamp (34) and hose (33) from pump house heater (35).
END OF TASK
INSTALLATION
NOTE
Front and rear pickup tube assemblies are installed the same way. Front pickup tube
assembly shown.
Remove cap from bottom of pickup tube assembly before installation, or fuel will not be
able to enter tube.
Do not let go of pickup tube assembly after it is positioned in tank until nut is installed on
top of tank, or assembly will fall in tank.
Perform Steps (1) through (6) to install fuel line and hoses for pump house heater.
1.
Install hose (33) on pump house heater (35) with clamp (34).
2.
Install fuel line (30) on hose (33) with clamp (32).
NOTE
Install cable ties as required.
3.
Install fuel line (30) through pump house (31).
0468-6
