• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
DRIVER SIDE BODY WIRE HARNESS REPLACEMENT
DRIVER SIDE BODY WIRE HARNESS REPLACEMENT - Continued

Maintenance Manual For Tactical Fire Fighting Truck (Tfft) Model M1142 - 3 Page Navigation
  585    586    587    588    589  590  591    592    593    594    595  
img
DRAFT
TM 5-4210-249-13&P-3
0448
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT03483
CAUTION
Equipment (ladder) rack must be raised approximately 3/4 up to allow compartment
doors to be opened. Failure to comply may result in damage to equipment.
NOTE
Tag and mark wires prior to removal to ensure proper installation.
Note routing of driving side body wire harness prior to removal to ensure proper
installation.
Note position and remove cable ties, split looms, and cushion clips as required.
Remove driver side body wire harness so that entire wire harness is routed into driver side
stowage compartment D3.
Perform Step (1) and (2) if power is supplied to ladder rack motors.
1.
Raise ladder rack (1) approximately 3/4 up.
2.
Disconnect batteries (TM 9-2320-325-14&P).
0448-2


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.