DRAFT
TM 5-4210-249-13&P-3
0420
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01083A
NOTE
Perform Steps (5) through (8) if removal of button and handle is necessary.
5.
While holding handle (10), remove outer guard (11) from handle (10) and rear step buzzer cable (7).
6.
Remove button (12) from handle (10).
7.
Remove two screws (13) and wires (1) and (2) from button (12).
8.
Remove handle (10) from rear step buzzer cable (7).
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) through (3) if button and handle were removed.
1.
Install handle (10) on rear step buzzer cable (7).
2.
Install two wires (2) and (1) on button (12) with screws (13).
3.
Install button (12) on handle (10).
4.
Install outer guard (11) on handle (10) and rear step buzzer cable (7).
0420-2
