DRAFT
TM 5-4210-249-13&P-3
0335
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT0681A
NOTE
Perform Steps (3) and (4) if pump panel side lamp bracket needs to be removed.
Tag and mark wires prior to removal to ensure proper installation.
Both side lamp brackets are removed the same way.
3.
Cut two wires (6) (TM 9-2320-325-14&P).
4.
Remove two locknuts (7), four washers (8), two screws (9), and side lamp bracket (10) from pump operator's
panel housing (11).
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) and (2) if pump panel side lamp bracket was removed.
Both side lamp brackets are installed the same way.
1.
Install side lamp bracket (10) on pump panel housing (11) with two screws (9), four washers (8), and two
locknuts (7).
2.
Repair two wires (6) (TM 9-2320-325-14&P).
0335-2