DRAFT
TM 5-4210-249-13&P-3
0310
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01280
7.
Install switch (4) on panel (9) with lockwasher (8) and nut (7).
8.
Install wire (2) on switch (4) with screw (1).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
9.
Apply electrical sealant to end of wire (2).
NOTE
Perform Steps (10) through (12) to install high idle switch only.
10. Install wire (6) on switch (4) with screw (5).
11. Install wires (3) and (2) on switch (4) with screw (1).
12. Apply electrical sealant to three wires (2), (3), and (6).
END OF TASK
0310-3
