DRAFT
TM 5-4210-249-13&P-3
0310
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01281
NOTE
Perform Steps (4) through (8) to remove high idle indicator light only.
4.
Remove screw (1) and wire (2) from switch (4).
5.
Remove indicator (10) from lens (11).
6.
Remove lamp (12) from indicator (10).
7.
Cut wire (13) (TM 9-2320-325-14&P).
8.
Remove cover (14) from lens (11).
9.
Remove nut (15), lockwasher (16), and lens (11) from panel (9). Discard lockwasher.
10. Remove four screws (17) and plate (18) from panel (9).
END OF TASK
INSTALLATION
1.
Install plate (18) on panel (9) with four screws (17).
NOTE
Perform Steps (2) through (6) to install high idle indicator only.
2.
Install lens (11) on panel (9) with lockwasher (16) and nut (15).
3.
Install cover (14) on lens (11).
4.
Repair wire (13) (TM 9-2320-325-14&P).
5.
Install lamp (12) on indicator (10).
6.
Install indicator (10) on lens (11).
0310-2