DRAFT
TM 5-4210-249-13&P-2
0272
REMOVAL
TFFT1069
CAUTION
When removing four drain lines from push lock fittings, care must be taken not to
damage sealing surfaces. If sealing surface of air line is damaged air line must be
repaired or replaced.
NOTE
Tag and mark drain lines prior to removal to ensure proper installation.
Two rear drain lines must be removed after drain valve is removed from bracket.
1.
Remove two drain lines (1) and (2) from fittings (3) and (4).
2.
Remove drain line (5) from fitting (6).
3.
Remove locknut (7), screw (8), and swivel (9) from drain valve (10). Discard locknut.
4.
Remove two screws (11), lockwashers (12), washers (13), and drain valve (10) from bracket (14). Discard
5.
Remove two drain lines (15) and (16) from fittings (17) and (18).
0272-2