DRAFT
TM 5-4210-249-13&P-2
0270
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT0917A
NOTE
Stop on valve handle is positioned between 90 degree indent on valve.
Note position of valve handle on valve prior to removal to ensure proper installation.
3.
Remove locknut (3) and valve handle (1) from valve (4). Discard locknut.
NOTE
Tag and mark hoses prior to removal to ensure proper installation.
Clamp may not be reused.
4.
Remove clamp (5) and hose (6) from elbow (7).
5.
Remove two screws (8), washers (9), and valve (4) from bracket (10).
6.
Remove hose (11) from elbow (12).
7.
Remove two elbows (7) and (12) from valve (4).
END OF TASK
0270-2