DRAFT
TM 5-4210-249-13&P-2
0237
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01832
9.
If water pump engine starts, go to Step (12). If water pump engine does not start, or if fuel does not flow from
fitting (8), install fuel return hose (7) on fitting (8) with clamp (6) and remove fuel system bleed plug (9) from
primary fuel filter head (10), located near fuel tank.
10. With the aid of an assistant, hold suitable drain pan under primary fuel filter head (10) and engage water pump
engine starter to turn fuel pump.
11. If fuel flows from fuel system bleed port, stop turning engine and install fuel system bleed plug (9) in primary
fuel filter head (10).
12. Wipe up any spilled fuel. Attempt to start water pump engine (WP 0022).
13. If water pump engine starts, check for fuel leaks, close pump house access panel (2) and crew cab access
panel (1).
14. If water pump engine does not start, repeat fuel system bleed process or check for additional engine
problems.
END OF TASK
END OF WORK PACKAGE
0237-3/(4 blank)