DRAFT
TM 5-4210-249-13&P-2
0230
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00909B
5.
Remove screw (13), washer (14), and splash guard (15) from charge air cooler (6).
6.
Remove three nuts (16), washers (17), screws (18), and charge air cooler backing plate (19) from charge air
cooler (6).
7.
Remove fan belt (12) from three pulleys (20), (21), and (22).
INSTALLATION/ADJUSTMENT
NOTE
Install belt as noted prior to removal.
1.
Install fan belt (12) on three pulleys (22), (21), and (20).
2.
Install charge air cooler backing plate (19) on charge air cooler (6) with three screws (18), washers (17), and
nuts (16).
3.
Install splash guard (15), on charge air cooler (6) with screw (13) and washer (14).
4.
Using square wrench in pulley bracket adjusting hole (11), move bracket (10) to tighten fan belt (12) to
101 lb-ft (450 Nm), as indicated by belt tensioner gauge, and tighten screws (9) and (8).
0230-3