DRAFT
TM 5-4210-249-13&P-2
0220
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00274
8.
Remove locknut (17), two washers (18), lockwasher (19), screw (1), and cushion clip (2) from filter
housing (5). Discard locknut and lockwasher.
9.
Remove grommet (4) from filter housing (5).
NOTE
Note position of four seals prior to removal to ensure proper installation.
10. Remove 16 rivets (20), washers (21), and four seals (22) from filter housing (5).
END OF TASK
INSTALLATION
NOTE
Install four seals as noted prior to removal.
1.
Install four seals (22) on filter housing (5) with 16 washers (21) and rivets (20).
2.
Install grommet (4) on filter housing (5).
3.
Install cushion clip (2) on filter housing (5) with screw (1), lockwasher (19), two washers (18), and locknut (17).
Do not tighten screw (1).
0220-3