DRAFT
TM 5-4210-249-13&P-2
0219
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01543
8.
Install two hoses (84) on elbows (85).
NOTE
Install cable ties as required.
9.
Connect connector (83).
NOTE
Route cable as noted prior to removal.
10. Install cable (80) on stud (81) and engine (82) with nut (79) and cap (78).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
11. Apply electrical sealant to end of cable (80).
12. Install fuel return line (76) on fitting (77) with clamp (75).
13. Close door (74).
0219-43