DRAFT
TM 5-4210-249-13&P-2
0219
INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01545
1.
Install cable (102) on starter stud (103) with washer (101) and nut (100).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
2.
Apply electrical sealant to end of cable (102).
3.
Install pipe (98) on pump house heater assembly (99) with clamp (97).
0219-40