DRAFT
TM 5-4210-249-13&P-2
0203
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01676
NOTE
Perform Step (10) if brackets need to be removed.
10. Remove four screws (18), lockwashers (19), washers (20), and two brackets (13) from vehicle. Discard
lockwashers.
END OF TASK
INSTALLATION
NOTE
Perform Step (1) if brackets need to be installed.
1.
Install two brackets (13) on vehicle with four washers (20), lockwashers (19), and screws (18).
NOTE
Perform Steps (2) through (6) if filter needs to be installed.
2.
Install filter (17) in filter housing (8) with wingnut (16).
3.
Install clamp (14) and bottom cover (15) on filter housing (8).
CAUTION
Ensure that bottom cover is 0.5 to 1 in. (12.7 to 25.4 mm) above bottom of vehicle
compartment to allow drainage. Failure to comply may result in damage to
equipment.
4.
Position filter housing (8) in two brackets (13).
5.
Install two nuts (12) and screws (11) on brackets (13).
6.
Install clamp (9) and hood (10) on filter housing (8).
0203-3