DRAFT
TM 5-4210-249-13&P-2
0202
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00722A
6.
Tighten two screws (3) on bracket (4).
7.
Install panel (2) on vehicle with three screws (1).
NOTE
Crew cab air conditioner/heater must be programmed to initial parameters.
8.
Push and hold P button (5) until "db" is shown on display screen (6).
9.
Push up arrow button (7) until "ft" is shown on display screen (6).
NOTE
Display will show "nr" until temperature reading is displayed. "P" button will have to be
pushed and held for approximately 15 to 20 seconds before temperature reading will be
shown on display.
10. Hold P button (5) until temperature reading is shown on display screen (6).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0202-6