DRAFT
TM 5-4210-249-13&P-2
0186
Table 1. Preventive Maintenance Checks and Services. (Continued)
Item
Interval
Item To Inspect
Crewmember Procedure
Not Fully Mission
No.
Or Service
Capable if:
27
During
Gauges
Inspect gauges for visible damage. Check that all
Any gauge is
segments of water tank and foam tank level gauges
damaged or
illuminate when tanks are full.
inoperable.
28
During
Gauges,
Indicators, and
Warning Lights
TFFT00202P
NOTE
During operation, all gauges should maintain proper readings.
a.
Start water pump engine (WP 0022).
b.
Monitor all gauges, indicators, and warning
lights for proper reading while operating
vehicle.
c.
Check the following gauges for proper
operation:
OIL PRESSURE - Minimum oil pressure
1.
with engine warm and low idle speed is
12 psi (83 kPa).
ENGINE TEMP - Operating range is 181
2.
to 203F (83 to 95C).
VOLTAGE - 24-volt.
3.
FUEL GAUGE
4.
5.
ENGINE RPM
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0186-17
