DRAFT
TM 5-4210-249-13&P-2
0182
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04587
Step 16.
Turn battery disconnect switch to OFF position (WP 0007). Remove jumperwire from
pump house wire harness pump house heater diagnostic module connector. Remove
pump house panel G (WP 0540). Disconnect pump house wire harness pump house
heater 4-terminal connector. With a test lead set, check for continuity across pump
house wire harness wire 4087 (blue) from pump house wire harness pump house
heater diagnostic module connector, terminal C to pump house wire harness pump
house heater 4-terminal connector, terminal 4.
If there is no continuity, repair wire 4087 in pump house wire harness if
repairable (TM 9-2320-325-14&P), or replace pump house wire harness
(WP 0458).
0182-13