DRAFT
TM 5-4210-249-13&P-2
0174
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT4469
Step 19.
Remove rear stowage compartment R-1 light (WP 0374). Cut rear body wire harness
stowage compartment light butt splice connector wire 1471 (black). Check for
continuity across rear body wire harness wire 1471 (black) from rear stowage
compartment butt splice connector, to rear stowage compartment door switch
connector.
If there is no continuity, repair wire 1471 in rear body wire harness if
repairable (TM 9-2320-325-14&P), or replace rear body wire harness
(WP 0461).
Step 20.
Reconnect passenger wire harness rear body wire harness connector. Cut rear body
wire harness stowage compartment light butt splice connector wire 1189 (red). Turn
battery disconnect switch to ON position (WP 0007). Turn Service Drive Lights On
(TM 9-2320-347-10). Check for 22 to 28 VDC between wire 1189 (red) at rear body
wire harness stowage compartment light butt splice connector, and a known good
ground.
a.
If 22 to 28 VDC are present, replace rear stowage compartment light
(WP 0374).
b.
If 22 to 28 VDC are not present, repair wire 1189 in rear body wire
harness if repairable (TM 9-2320-325-14&P), or replace rear body wire
harness (WP 0461).
0174-14
