DRAFT
TM 5-4210-249-13&P-2
0151
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03674
Step 3.
Install fuse FS 13 (WP 0401). Remove cab instrument panel C (WP 0311). Disconnect
cab instrument panel wire harness EMERG MASTER switch connector. Turn battery
disconnect switch to ON position (WP 0007). Turn Service Drive Lights
On (TM 9-2320-347-10). Check for 22 to 28 VDC between cab instrument panel wire
harness wire 1623 (yellow) at EMERG MASTER switch connector, terminal 6 and a
known good ground.
If 22 to 28 VDC are present, go to Step 5.
0151-3