DRAFT
TM 5-4210-249-13&P-2
0147
TFFT04444
Step 7.
Turn water pump engine off (WP 0022). Disconnect pump operator's panel wire
harness 4-terminal dual governor switch wire harness connector. With a test lead set,
check for continuity across wire 4061 from pump operator's panel pressure governor
12-terminal wire harness connector, terminal 10 to pump operator's panel wire harness
4-terminal dual governor switch connector, terminal 2.
a.
If continuity is present, replace dual governor pressure
switch (WP 0386).
b.
If continuity is not present, repair wire 4061 in pump operator's panel
wire harness if repairable (TM 9-2320-325-14&P), or replace pump
operator's panel wire harness (WP 0459).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0147-6
