• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
WATER PUMP ENGINE PRESSURE GOVERNOR CONTROL PANEL THROTTLE READY AND/OR PUMP ENGAGE LEDS DO NOT ILLUMINATE - Continued
WATER PUMP ENGINE PRESSURE GOVERNOR CONTROL PANEL THROTTLE READY AND/OR PUMP ENGAGE LEDS DO NOT ILLUMINATE - Continued

Maintenance Manual For Tactical Fire Fighting Truck (Tfft) Model M1142 - 2 Page Navigation
  234    235    236    237    238  239  240    241    242    243    244  
img
DRAFT
TM 5-4210-249-13&P-2
0147
TFFT04444A
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 6.
Turn water pump engine off (WP 0022). Open pump operator's panel
housing (WP 0325). Disconnect pump operator's panel wire harness pump operator's
panel pressure governor 12-terminal wire harness connector. Start water pump
engine (WP 0022). With a test lead set, check for 22 to 28 VDC on wire 4061 from
pump operator's panel pressure governor 12-terminal wire harness connector,
terminal 10 to a known good ground.
If 22 to 28 VDC are present, replace pump operator's panel pressure
governor control panel (WP 0332).
0147-5


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.